Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Duct Repair for Tallahassee Homeowners
A torn duct run, a joint that’s pulled apart, or a boot that no longer meets the register doesn’t just waste cooling – it quietly dumps conditioned air into your attic or wall cavity every time the system runs. Air duct repair fixes that break at the source, so the air you’re paying to cool actually reaches the rooms you live in. Our technicians have up to 9 years of experience, and we work on homes across Tallahassee with the same focused process: find the failure with a camera and pressure readings, show you what we found, and repair it with a written price agreed before any tool comes out. We’re licensed and insured, we set one flat price per system, and we photograph the work before and after. Same-day service is often possible in Tallahassee. Call (888) 721-9610.
HVAC Duct Installation
HVAC Duct Installation is the full build-out of the duct system that carries conditioned air from your air handler to each room – trunk lines, branch runs, plenum connections, boots, dampers and registers – sized and sealed as one system rather than pieced together. You need it when a home has no ductwork (a new build or a conversion from window units), or when the existing layout is so wrong that patching it would cost more than building it right. Hillcrest Air Duct Cleaning designs the layout around your air handler’s capacity, seals every joint with mastic and mesh, and balances the branches so far rooms aren’t starved. Standard installations typically run $900-$1,800 depending on home size and run count, and a written estimate sets the final price.
Layout and Load Planning
We measure room-by-room airflow needs against your air handler’s rated output before any sheet metal is cut. That step is where most uncomfortably hot bedrooms get solved – the fix usually isn’t a bigger unit, it’s a properly sized branch. Getting the sizing right up front keeps static pressure in range and protects the blower.
Sealing and Balancing
Every seam gets mastic, not tape, because tape lifts in a hot Florida attic within a season. After the system is sealed we read airflow at each register and adjust dampers until the far rooms match the near ones. That final balance check is what turns a finished installation into a comfortable home.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Air Duct Replacement
Air Duct Replacement is the removal of an existing duct system and the installation of a new one in its place, used when the old ductwork has deteriorated past the point where repair pays off. You need it when flex duct has collapsed on itself, when the interior liner of insulated duct has shredded and is blowing particles into the airstream, or when sections were sized for an old system and can’t move enough air for the current one. We remove the old runs, haul them out, and install new duct sized to your equipment. Typical Air Duct Replacement runs $700-$1,400 for partial runs and $1,500-$3,500 for a full home system, with the written estimate setting the final price.
Telling Replacement From Repair
We put a camera inside before recommending replacement. If the failure is isolated – one crushed run, a single disconnected joint – repair is the honest answer and we’ll say so. Replacement comes into the conversation only when the duct material itself is breaking down across multiple runs.
Choosing Duct Material
R-6 or R-8 insulated flex suits most attic runs in this climate; rigid metal with external wrap holds up better where runs are long or airflow is high. We match the material to the run, not to whatever’s on hand. The right material choice is what keeps the new system quiet and efficient for the long run.
Ductwork Repair
Ductwork Repair is the targeted fix of a specific failure in your existing duct system, and it’s the service most Tallahassee homes actually need. It covers disconnected joints, torn flex duct, crushed runs under flooring, failed takeoffs at the plenum, and boots that have separated from the register boxes behind drywall. We locate the break with camera inspection and airflow readings, then repair that section, seal it with mastic, and verify airflow afterward. Typical Ductwork Repair in Tallahassee is estimated at $180-$450 depending on access and how many points need attention, and one flat price per system is agreed in writing before work starts.
Chasing Leaks With Airflow Readings
The worst leaks rarely announce themselves. We read static pressure and airflow at each register, then work backward to find where the pressure drops – a diagnostic approach that catches the split run hidden above a ceiling rather than the easy-to-see one. You get the reading, not a promise.
Sealing for the Long Haul
Every repair gets mastic over mesh on the joint, and collapsed flex gets a rigid inner sleeve so it can’t crush again. We don’t rely on foil tape in an attic that hits 130 degrees. That work plus before-and-after photos is what you’re paying for, and we’ll show you both.
Duct Replacement
Duct Replacement means swapping out a failed duct run or assembly for new material, and it’s the right call when a section has been wet, crushed, or has liner failing from the inside out. It comes up most often after a roof leak has soaked an attic run, or when a home renovation has left ductwork that no longer fits the space. We cut out the failed section, install new insulated duct matched to the original size, seal the joints, and check that airflow at the closest register is back where it belongs. Duct Replacement estimates typically fall between $350 and $900 per run depending on length and attic access, and the written estimate is what sets the final price.
Water-Damaged Attic Runs
Insulated duct that gets wet loses its insulating value even after it dries, and the interior lining can hold moisture where mold grows. If a run has been soaked by a roof leak or a condensate overflow, replacing it is usually cheaper than pretending it’s fine. We look for that staining during inspection.
Runs That Were Never Sized Right
A run that’s undersized for its register will whistle and under-deliver no matter how clean it is. During replacement we measure the branch against the register it feeds. When the original installer went too small, swapping to the correct diameter is a small change that fixes a room that’s been hot for years.
Ductwork Installation
Ductwork Installation covers the new duct runs added to an existing system – an addition, a converted garage, a finished bonus room, or a branch added when a wall comes out. You need it when the equipment is fine but the duct network doesn’t reach where you now want air. We size the new run to the register and the air handler’s remaining capacity, tap into the trunk with a proper takeoff, and seal and balance the new branch so the existing rooms don’t lose airflow. Ductwork Installation estimates for a single new run typically run $400-$950, and the written estimate sets the final price after we’ve seen the layout.
Tapping Into an Existing Trunk
Adding a branch is only safe if the trunk has capacity to spare. We measure static pressure before and after the tap so the new room doesn’t steal from the old ones. If the trunk is already maxed, we say so before cutting anything.
Runs Through Tight Attics
Older Tallahassee homes often have shallow attic space where a full-size run won’t fit. Rigid duct with external wrap sometimes fits where flex won’t, and a smaller-diameter high-velocity run is another option. We plan the route before we commit, so the finished run is serviceable later.
Brands We Service
We work on duct systems tied to Honeywell and Aprilaire air-quality equipment, and we understand how those systems interact with the ductwork around them. A Honeywell zone damper or a bypass humidifier installs into the duct envelope, and when a damper sticks or a takeoff leaks, the airflow problem shows up in the ducts. Knowing where those components sit tells us where to look first. Our equipment is purpose-built for this work: Rotobrush and Nikro systems for cleaning, and Abatement Technologies for containment and extraction when contaminants are part of the job.
Nikro HEPA vacuums and Rotobrush brushes reach into runs that consumer tools can’t, and we use them on every repair job before the work is closed up. We don’t stock parts or claim dealer status with any manufacturer – what we bring is trained hands and the right machines. Call (888) 721-9610 to schedule, whether you have Honeywell, Aprilaire, or any other make, we can help – and if the ducts are simply overdue for cleaning, our air duct cleaning specialists cover that too.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Rooms that never cool, even with the system running. When the air handler runs hard but a room stays warm, the likely cause is a disconnected or crushed run feeding that room. Getting airflow restored usually fixes the room faster than touching the equipment.
- Dust on the register faces a day after you clean them. That’s often pulled-in attic air, which means a joint has opened somewhere upstream. It’s dust entering the system, not dust already in the room.
- Whistling or roaring at one vent. A high-pitched noise at a single register usually points to a crushed run or an undersized branch. Air is being squeezed through a path that’s too small for the volume.
- A musty smell when the system first comes on. This pattern – only at startup, then fading – often traces to a duct section that’s been wet. If the smell stays and the run was ever soaked, replacement may be the more honest fix than cleaning.
- Rising power bills without a change in habits. When the system is working harder to move the same air, leaking ducts are a frequent culprit. A pressure check identifies it without guesswork.
Our Process, Step by Step
- 1
Camera inspection of the duct system. We push a camera through the trunk and branch lines to see the interior condition directly – not just the registers. This is the step that separates repair from replacement before anyone quotes a price.
- 2
Airflow and static pressure readings. We measure at each register and at the air handler. The pressure numbers tell us how much air is escaping and roughly where, which directs us to the break fast.
- 3
Written scope and flat price per system. You get a written estimate with the exact repairs, no per-vent pricing, and a flat price per system. Nothing starts until you say yes to that number.
- 4
Repair, seal, and containment. We use Rotobrush and Nikro tools to prep the work area and Abatement Technologies for containment where needed, then repair the failed sections and seal joints with mastic. The work is done in one visit in most cases.
- 5
Before-and-after verification. We re-read airflow at each affected register and photograph the repaired ducts. You see the change on paper and on screen before we leave.
How Much Does Air Duct Repair Cost in Tallahassee?
Air duct repair in Tallahassee is quoted as one flat price per system, and the price depends on how many points fail, whether the failure is reachable from the attic, and whether the run needs replacement or a seal. A typical ductwork repair in Tallahassee runs $180-$450 depending on access and the number of repair points. A single run replacement typically runs $350-$900 depending on length and attic access. Partial duct replacement for a home commonly runs $700-$1,400, and a full system replacement runs $1,500-$3,500. New duct installation for a full home system is estimated at $900-$1,800 depending on home size and run count.
What moves the price: attic access (a tight, low crawl space where a technician can barely turn around takes longer than a full-height attic), the number of separate leaks found, whether the failed material is flex or rigid, and whether a specific run is crushed under flooring or behind finished drywall. What affects the price most in Tallahassee is the number of unrelated failures found in one system – a home with four disconnected joints costs more than a home with one.
How to avoid overpaying: get the written scope before work starts, refuse the coupon-first quote that balloons after the technician is inside, and ask for the before-and-after photos. We give a free estimate, set one flat price per system, and never price per vent. Call (888) 721-9610 for an exact quote – estimates are free.
Our Service Area Near Tallahassee
We serve Tallahassee and the surrounding communities including Bradfordville, Woodville, Crawfordville, Quincy, Monticello, Midway, Havana, Fort Braden and Chaires. Drive times from our dispatch area to most of these towns are modest, and we coordinate the arrival window when you book. Same-day service is often possible in the closer-in Tallahassee neighborhoods. For the surrounding Tallahassee area, call and we’ll confirm timing for your address when we schedule.
Serving Tallahassee, FL – Our Local Coverage Area
We serve Tallahassee and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Air Duct Repair in Tallahassee
Air duct repair is the targeted fix of a failure in the duct system that carries conditioned air from your air handler to your rooms – a disconnected joint, a torn or crushed run, a separated boot, or a leaking plenum connection. It’s not a cleaning, and it’s not duct installation; it’s finding where your existing ducts are losing air or letting outside air in, and restoring them. We inspect with a camera, repair the failed sections, and verify airflow at the affected registers afterward. Call (888) 721-9610 to schedule an inspection.
Most single-point repairs are done in one visit, typically one to two hours on site once we’ve confirmed access. Multi-point repairs or a run replacement take longer, often half a day. Attic access and the number of failures are the two variables, and we give you a realistic time estimate when you book. Call (888) 721-9610 – estimates are free.
A typical duct repair in Tallahassee runs $180-$450 depending on access and how many points need attention, and run replacement typically runs $350-$900 per run. Whole-system scenarios climb into the $1,500-$3,500 range when replacement is the right answer. Our written estimate is what sets the final price, and it’s one flat price per system. Call (888) 721-9610 for an exact quote – estimates are free.
Yes, we work on duct systems tied to Honeywell and Aprilaire air-quality equipment and understand how those components interact with the ductwork. That matters because a leaking takeoff near a Honeywell damper or an Aprilaire bypass is easy to miss if the technician only knows ducts and not the air-quality hardware. Whether you have those brands or another make, we can help. Call (888) 721-9610 to discuss your setup.
Same-day service is often possible in Tallahassee when you call earlier in the day, and we confirm timing when you book. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (888) 721-9610.
Yes – we stand behind the repair work with a satisfaction guarantee. If something we sealed or replaced doesn’t hold, we come back and make it right. The details are spelled out in the written estimate so you know exactly what’s covered before work starts. Call (888) 721-9610 to schedule.
Clear access to your attic hatch and the area around your air handler is the main thing. If you have pets, keeping them in a closed room during the visit helps, and moving fragile items off shelving near the attic access prevents accidents. That’s all we need. Call (888) 721-9610 to schedule.
Schedule Your Air Duct Repair Service in Tallahassee Today
If your ducts are leaking, crushed, or failing the pressure check, we can look at the system and give you a flat written price before anyone starts work. Our technicians have up to 9 years of experience, we’re licensed and insured, and you’ll see before-and-after photos of the repair. Call (888) 721-9610. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and you’re under no obligation to book after the visit.
Written by the team at Hillcrest Air Duct Cleaning.